[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] Hatch fabrication dilemma



Jim,
     I would say just weld them in place and follow Dan's method with the
reamer.  But I haven't actually done it yet so check with Dan.

Brian

-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of Jim Kocourek
Sent: Sunday, December 30, 2007 9:32 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Hatch fabrication dilemma


Hi Brian,

I'm not sure exactly how I will be doing others,but I was thinking of
welding in threaded bosses, retapping and threading thru-hull connectors
into them.

Best Regards,

Jim Kocourek


----- Original Message -----
From: "Brian Cox" <ojaivalleybeefarm@dslextreme.com>
To: <personal_submersibles@psubs.org>
Sent: Sunday, December 30, 2007 9:31 AM
Subject: RE: [PSUBS-MAILIST] Hatch fabrication dilemma


> How are you doing your other thru hull fittings?
>
> Brian
>
> -----Original Message-----
> From: owner-personal_submersibles@psubs.org
> [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Jim Kocourek
> Sent: Sunday, December 30, 2007 6:58 AM
> To: personal_submersibles@psubs.org
> Subject: Re: [PSUBS-MAILIST] Hatch fabrication dilemma
>
>
> I'm hoping for some design input. I am doing final design on the sleeve
> assemblies that the forward thrusters will pivot on. I plan on a final ID
> of
> 1.5 inches and an OD of about 2.5 inches. This will allow adequate space
> to
> machine a seal chamber as well as provide more than adequate strength.
> Because the welding will shrink and distort the tube I plan on doing final
> machining after welding. I plan on welding the sleeve into a 3/4 inch
> thick
> and 5 inch diameter flat disc prior to machining. after this I plan on
> cutting a five inch hole in the hull and welding the disc in place. I feel
> that this method will put the final weld distortion far enough away so as
> to
> not cause distortion of the sleeve. My hull is 48 inches in diameter and
> 1/2
> inch thick.
>
> Does this sound reasonable to those of you who have been there before or
> do
> you have better ideas.
>
> Thanks in advance!
>
> Best Regards,
> Jim Kocourek
>
> ----- Original Message -----
> From: "James Frankland" <james@guernseysubmarine.com>
> To: <personal_submersibles@psubs.org>
> Sent: Wednesday, October 17, 2007 2:46 PM
> Subject: Re: [PSUBS-MAILIST] Hatch fabrication dilemma
>
>
>> Hello Alec.
>>
>> I dont suppose you have any pictures of the hatch dilemma you could share
>> with us?  Im particually interested in seeing how you get on as im going
>> to be doing my own hatch very soon.
>>
>> Did you make a jig or cramps of any sort to hold the ring and dish
>> together for welding?
>>
>> I was thinking of making a jig that would hold the ring down tight and
>> cramp the dish on top to keep it all rigid to minimise distortion.  But
>> im
>> not sure if thats needed.  What do you think?
>>
>> Anyway, good luck.  i hope it doesnt take to much fixing.
>>
>> James
>>
>>
>> ----- Original Message -----
>> From: "Smyth, Alec" <Alec.Smyth@compuware.com>
>> To: <personal_submersibles@psubs.org>
>> Sent: Wednesday, October 17, 2007 5:22 PM
>> Subject: RE: [PSUBS-MAILIST] Hatch fabrication dilemma
>>
>>
>> Phil, you apparently replied but didn't type anything?
>>
>> Thanks,
>>
>> Alec
>>
>>
>> The contents of this e-mail are intended for the named addressee only. It
>> contains information that may be confidential. Unless you are the named
>> addressee or an authorized designee, you may not copy or use it, or
>> disclose it to anyone else. If you received it in error please notify us
>> immediately and then destroy it.
>>
>> From: owner-personal_submersibles@psubs.org
>> [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Phil Nuytten
>> Sent: Wednesday, October 17, 2007 11:22 AM
>> To: INTERNET:personal_submersibles@psubs.org
>> Subject: [PSUBS-MAILIST] Hatch fabrication dilemma
>>
>>
>>
>>
>>
>>
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>> The personal submersibles mailing list complies with the US Federal
>> CAN-SPAM Act of 2003.  Your email address appears in our database
>> because either you, or someone you know, requested you receive messages
>> from our organization.
>>
>> If you want to be removed from this mailing list simply click on the
>> link below or send a blank email message to:
>> removeme-personal_submersibles@psubs.org
>>
>> Removal of your email address from this mailing list occurs by an
>> automated process and should be complete within five minutes of our
>> server receiving your request.
>>
>> PSUBS.ORG
>> PO Box 53
>> Weare, NH  03281
>> 603-529-1100
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>>
>>
>>
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>> The personal submersibles mailing list complies with the US Federal
>> CAN-SPAM Act of 2003.  Your email address appears in our database
>> because either you, or someone you know, requested you receive messages
>> from our organization.
>>
>> If you want to be removed from this mailing list simply click on the
>> link below or send a blank email message to:
>> removeme-personal_submersibles@psubs.org
>>
>> Removal of your email address from this mailing list occurs by an
>> automated process and should be complete within five minutes of
>> our server receiving your request.
>>
>> PSUBS.ORG
>> PO Box 53
>> Weare, NH  03281
>> 603-529-1100
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>>
>>
>>
>>
>>
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>> The personal submersibles mailing list complies with the US Federal
>> CAN-SPAM Act of 2003.  Your email address appears in our database
>> because either you, or someone you know, requested you receive messages
>> from our organization.
>>
>> If you want to be removed from this mailing list simply click on the
>> link below or send a blank email message to:
>> removeme-personal_submersibles@psubs.org
>>
>> Removal of your email address from this mailing list occurs by an
>> automated process and should be complete within five minutes of
>> our server receiving your request.
>>
>> PSUBS.ORG
>> PO Box 53
>> Weare, NH  03281
>> 603-529-1100
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition. Version: 7.5.488 / Virus Database:
>> 269.14.13/1075 - Release Date: 10/17/2007 9:38 AM
>>
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
>
>
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.12/1203 - Release Date:
> 12/30/2007 11:27 AM
>
>




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************







************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************