[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] New photos - ferro sub



Brent,
             Everything besides my ferro structure is going to be nearly identical to a standard kittridge sub, as far as the pressure hull goes.
 
Brian
-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Brent Hartwig
Sent: Sunday, August 10, 2008 9:46 PM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] New photos - ferro sub

Hello Brian,
 
Your first link worked.  Frappr has a couple quarks to get used to.  Once I finish uploading my picture(s), I click on photos, to go to the main photo page with all my photos in thumbnails. Then I click on the one I wish to save a link to. Once that photo opens up in it's full size you'll notice that at the end of the web link address above, it will have the word myphotos.  That link will not work for others in the group. So click on that photos thumbnail to the right and you'll notice the link address will change, but the large photo will not. That's the link you'll want. For example
 
http://www.frappr.com/?a=viewphoto&id=759383&pid=10308304


I have a fair bit of wire mesh left over from my exotic bird farming days.   Now I know what I can do with it. ;)'
 
We always made sure are wire mesh was galvanized after welding for corrosion issues.  It's good to see some pictures of your project. I'm interested in how you plan to install your hatch assembly. Do you have any drawings of your ideas?

Cheers,
Brent



From: ojaivalleybeefarm@dslextreme.com
To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] New photos - ferro sub
Date: Sat, 9 Aug 2008 15:17:02 -0700

I'm finally making a little progress.  I've been working on the top half of the ferro body.  After all the wire is put on I will apply the hex wire netting, then it will be plastering time again!
 
I'm not sure how to link this exactly, probably the first one.
 
 
 
Cheers,
 
Brian