[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] FW: New Submersibles Launched - September 2008



 
The non-pressurized outer body is fiberglas, but the pressure hull is steel.  I believe you stand upright in it, which I think is a very worthy design with numerous fabrication benefits for short-duration dives.
-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org]On Behalf Of ShellyDalg@aol.com
Sent: Thursday, September 11, 2008 11:51 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] FW: New Submersibles Launched - September 2008

Hi Hugh. Looks like the Uboatworx people have been busy. Good to 100 meters? That should sell their subs well. These subs are made of fiberglass I think. I like the one large dome versus the two smaller ones on the first models. Frank D.