RE: [PSUBS-MAILIST] Manipulator actuattion / design

[<jonw@psubs.org>]

Hugh,

Dan Brewer built a hydraulic arm for his sub.  Photos are available on the
web site under the 2007 convention.  While I didn't get a chance to talk to
Dan about it, I know some folks on the list did.  They (or Dan) can probably
provide some details.

Jon


-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of Hugh Fulton
Sent: Saturday, October 04, 2008 7:51 PM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] Manipulator actuattion / design


Phil, Where can we get info on the dump mechanism.  Sounds a must.  Also any
places to see a simple manipulator design?  Hugh





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************