REVISION V1.00 2003-01-16 1. Pressure Hull 1.0 Pressure Hull Specification Ian Roxborough 1.1 Pressure Hull Component Drawings 1.2 Pressure Hull Fabrication Documentation 2. Ballast System 2.0 Ballast System Specification 2.1 Hard Ballast Drawings 2.2 Soft Ballast Drawings 2.3 Emergency/Drop Ballast 2.4 HPA Supply for Ballast System 2.5 Ballast Systems Integration Concept 3. Electric System 3.0 Battery Technology Specification 3.1 External Battery Enclosure Design 3.2 Secondary Battery System Design 3.3 Battery-Pressure Hull Interconnection Design 3.4 PWM Speed Controller 3.5 External and Internal Lighting 3.6 Electronic Gauges Design 3.7 Electrical Systems Drawings and Schematics 4. Viewports - Doc 4.0 Viewport Design and Integration with Hull 4.1 Viewport Flange Design 4.2 Viewport and Flange Drawings 5. Hatch 5.0 Entrance Hatch Design and Integration with Hull 5.1 Hatch drawings 6. Propulsion 6.0 Design Propulsion System and Integrate With Hull 6.1 Select Propellers 6.2 Propulsion Systems Drawings and Schematics 7. Life Support 7.0 Design CO2 Scrubber System 7.1 Design Emergency Light System 8. Other - Mark Steed 8.0 Document Generation for Developers 8.1 Final Assembly Documentation 8.2 Specicifation Compliance Officer - John Rogers 8.21 Cost Analysis 8.22 Format Standards and Interchange 8.23 Quality/Viability Auiditing John Rogers 8.3 Reference Material Generation and Research for Developers Garry Muir Vance Carl 8.4 Material Sources Research Garry Muir Vance Carl