[PSUBS-MAILIST] Battery pods

[swaters]

One is positive 12 volt, one is positive 36 volt, and one is a battery vent. They are the same on both pods. This gives me the ability to select battery pods. I am currently grounding through the hull and from the advice of Vance am adding a sacraficial anode. Not sure if all my methods are best, but that is how I did it. Electrical is one of my weaker strengths in the sub building process.
Thanks,
Scott Waters




Sent from my U.S. Cellular© SmartphoneJoe Perkel <josephperkel at yahoo.com> wrote:I've noticed that K350-006 Battery Pod & Tray, show the main electrical thru hull going to apparently nowhere. I've also noticed Dan H, Scott, and other K-350's with what appears to be a third vent tube just forward of the aft one of two shown on the drawings.

I'm assuming then that this is a relocation of the thru hull fitting and if so is it fabricated the same as the other two vent tubes, essentially discarding K350-043?

Joe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131221/3c8854ca/attachment.html>