[PSUBS-MAILIST] MK 101 Kort Nozzle Assembly

[Jon Wallace]

Looks great Joe.


On 11/1/2013 2:13 PM, Joe Perkel wrote:
> Psubbers,
> I have finalized the design of the Kort Nozzle assembly for a Minn 
> Kota 101 as per the dimensions provided me by another builder. There 
> are a few detail pictures on my project page. 
> http://www.psubs.org/projects/1371101163/msvalvinjr./
> Some assumptions, this is drawn for 11 3/8' dia square tip prop, 3 
> 7/8" body, again with dimensions provided. It requires a concentric 
> attach ring as you see here in SS in the style of a propeller shaft 
> anode. The beauty of that is that it allows fore and aft adjustment as 
> required.
> I will provide the CAD files and 2d drawings with B.O.M, required to 
> Jon for download over the next week or so for whatever process a 
> builder chooses. The nozzle can be scaled to accommodate other prop 
> and body dimensions as required.
> Doing these little projects will help me tremendously when my time 
> comes to build.
> Joe
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131101/ecb701b9/attachment.html>