[PSUBS-MAILIST] MK 101 Kort Nozzle Assembly

[Alan]

Following it now Joe, thanks.
I would still cast  the nozzle out of aluminium & make a jig for welding the 
struts & motor clamp if I were mass producing them.
Alan


Sent from my iPad

On 2/11/2013, at 12:39 PM, Joe Perkel <josephperkel at yahoo.com> wrote:

> Alan,
>  
> Added an exploded view, another builder had some questions as well.
>  
> Joe
> 
> From: Alan James <alanlindsayjames at yahoo.com>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
> Sent: Friday, November 1, 2013 4:30 PM
> Subject: Re: [PSUBS-MAILIST] MK 101 Kort Nozzle Assembly
> 
> Looks good Joe.
> Is there an exploded view available?
> Alan
> <Exploded.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131102/67439c53/attachment.html>