[PSUBS-MAILIST] O2 regulator

[James Frankland via Personal_Submersibles]

This is the sort of fitting i need.  I can see im going to have to change
the adapter if i cant find one.




On 24 April 2014 15:07, via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

>  ok. here ya go
>
>
> http://www.amazon.com/OXYGEN-Regulators-0-8-LPM-EA/dp/B004GC4IFG/ref=sr_1_6?s=industrial&ie=UTF8&qid=1398348350&sr=1-6&keywords=Medline+oxygen
>
> Mine is plumbed into my system which allows bottle selection so I used
> NPT. Here is the one that hooks up directly to a bottle.
>
> Thanks,
> Scott Waters
>
>
>  -------- Original Message --------
> Subject: Re: [PSUBS-MAILIST] O2 regulator
> From: James Frankland via Personal_Submersibles
> <personal_submersibles at psubs.org>
>  Date: Thu, April 24, 2014 6:58 am
> To: Personal Submersibles General Discussion
> <personal_submersibles at psubs.org>
>
> Hi Scott,
>
> Almost there, but its the wrong fitting.  I need a bull nose like you'd
> fit straight to a welding cylinder.  I made my system to take that sort as
> thats what my current reg was.  Id prefer not to change it as its all been
> cleaned etc and is really super simple.
>
> Emile, i'll try that guy.  Thanks
>
> Regards
> James
>
> On 24 April 2014 14:27, via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>>  James,
>>
>>
>> http://www.onlinemedicalsupply.com/p-8020-regulator-oxygen-0-8-lpm-540-cga.aspx?utm_source=GoogleProducts&utm_medium=cpc&utm_campaign=AllProducts&gclid=CK3Ajeuc-b0CFWEV7AodxTMANg#.U1kRH1KPLcs
>>
>> This is what I have in my sub. Flow rate down to 1/8 liter
>>
>> Thanks,
>> Scott Waters
>>
>>
>>  -------- Original Message --------
>> Subject: [PSUBS-MAILIST] O2 regulator
>> From: James Frankland via Personal_Submersibles
>> <personal_submersibles at psubs.org>
>> Date: Thu, April 24, 2014 6:20 am
>> To: personal_submersibles at psubs.org
>>
>> Hi all,
>>
>> Does anyone have a good source for medical oxygen flow regulators?  I'd
>> like the click type with a bull nose fitting, but one that goes as low as
>> 0.25 Lpm
>>
>> The one i have does a minimum of 1 Lpm and its too much, requiring
>> constant fiddling.
>>
>> Thanks
>> James
>> ------------------------------
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
> ------------------------------
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140424/ba7f4a6c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Regulator.JPG
Type: image/jpeg
Size: 15696 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140424/ba7f4a6c/attachment-0001.jpe>