[PSUBS-MAILIST] External Stiffeners

[via Personal_Submersibles]

The PC-14s, Aquarius, Curasub, et al use leg in T sections. ABS has not allowed anything similar to a doubler plate in many years, which the leg out design would give you.
Vance



-----Original Message-----
From: Pete Niedermayr via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles <personal_submersibles at psubs.org>
Sent: Sat, Apr 26, 2014 5:03 pm
Subject: [PSUBS-MAILIST] External Stiffeners


I have been looking at external stiffeners and I see that the figures in the ABS 
Hull Calculator shows them as (see Hull B pdf ) where as some subs (Curasub and 
Aquarius) seem to have them as (see Hull B pdf). Are they both correct ?

Thanks Pete

 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140426/05b7dd07/attachment.html>