[PSUBS-MAILIST] rpm

Pete Niedermayr via Personal_Submersibles personal_submersibles at psubs.org
Fri Aug 29 20:23:07 EDT 2014


Hank, What are you gonna use this pump for ?

Pete
--------------------------------------------
On Fri, 8/29/14, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] rpm
 To: personal_submersibles at psubs.org
 Date: Friday, August 29, 2014, 2:32 PM
 
 I am working on a hydraulic pump that
 will be external and pressure compensated in oil.  I am
 using a trolling motor to drive the pump.  A while back
 there was a question about rpm drop when a trolling motor is
 filled with oil.  I bench tested that today, and the
 motor runs at 2,000rpm stock and 1,800 rpm full of WD40.
 Hank
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 



More information about the Personal_Submersibles mailing list