[PSUBS-MAILIST] wanted

[Alan James via Personal_Submersibles]

Hi Hank,these people have some options.They have a standard 1/4" thick 36" diameter product.
Are you going to be able to get out of your sub should the ballast tank break?Plastic Domes | Plastic Hemispheres | California Quality Plastics Plastic Domes and Spheres

|   |
|   |  |   |   |   |   |   |
| Plastic Domes | Plastic Hemispheres | California Quality...Acrylic Domes, Plastic Domes & Hemispheres HomePlastic Domes & Hemispheres Plastic Domes & Hemis Plastic Spheres Plastic Cylinders Plastic Bell Jars Camer... |
|  |
| View on plastic-domes-spheres... | Preview by Yahoo |
|  |
|   |

  Alan
      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: personal_submersibles at psubs.org 
 Sent: Wednesday, December 10, 2014 8:36 AM
 Subject: [PSUBS-MAILIST] wanted
   
Hi all,
I am looking for a 36 in ish dia acrylic dome.  The dome will not be a pressure dome.  I intend to remove the front ballast tank from Gamma and replace it with an acrylic dome.  The dome will act as the new ballast tank.  I discovered that sitting in the front of the sub, the visibility is quite acceptable if it were not for the steel ballast tank.  
Any leads would be appreciated.
Hank 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141209/e4839ede/attachment.html>