[PSUBS-MAILIST] wanted

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Tue Dec 9 16:45:37 EST 2014


Alan,
I was thinking about welding a ring to the remaining section of steel ballast tank, then place the dome with a small flange on the ring.  Then another ring to clamp the dome's flange.  I don't like the idea of drilling the flange.  I got a price from Vancouver, 664 dollars for the 3/8 thick dome.  Got another price for 1/2 in dome from Nova Scotia 1,000 dollars US plus shipping.
Hank--------------------------------------------
On Tue, 12/9/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] wanted
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Tuesday, December 9, 2014, 4:02 PM
 
 So are you
 going to mount the dome with it's flange
 on?ie. weld
 on a circle of bolts & have a soft gasket that the
 domesits on
 & then another gasket & a  retaining
 ring?The reason
 I ask is that the retaining ring could also be used in
 the dome
 forming process to clamp the dome down & save
 youa
 bit of money. Alan
     
    From: hank pronk via
 Personal_Submersibles
 <personal_submersibles at psubs.org>
 
 To: Personal
 Submersibles General Discussion
 <personal_submersibles at psubs.org> 
 
 Sent:
 Wednesday, December 10, 2014 9:32 AM
 
 Subject: Re:
 [PSUBS-MAILIST] wanted
    
 
 Alan,
 I plan
 to remove the entire tank ahead of the vent valve.
 Hank--------------------------------------------
 On Tue, 12/9/14, Alan James via
 Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
  Subject: Re:
 [PSUBS-MAILIST] wanted
  To: "Personal
 Submersibles General Discussion" <personal_submersibles at psubs.org>
  Received: Tuesday, December 9, 2014, 3:12
 PM
  
  Hank,are you
  just replacing that conical bolt on portion at
 the
  front?Alan
      
     From: hank pronk via
 
 Personal_Submersibles
  <personal_submersibles at psubs.org>
  
  To: Personal
  Submersibles General Discussion
  <personal_submersibles at psubs.org>
 
  
  Sent:
 
 Wednesday, December 10, 2014 9:01 AM
  
  Subject: Re:
  [PSUBS-MAILIST]
 wanted
     
  
  Alan,
  As per
 
 ABS rules, the sub can surface on one ballast tank.  Also
 I
  could drop the lead weight that is in the
 front.  I found a
  company in Calgary (3hr
 away)  that will blow me a dome 3/8
  thick
 and 3/16 at the apex. I am trying to find a heavier
  one still, but it's a start.  
  
  Hank
 
 --------------------------------------------
  On Tue, 12/9/14, Alan James via
  Personal_Submersibles <personal_submersibles at psubs.org>
  wrote:
  
  
 Subject: Re:
  [PSUBS-MAILIST] wanted
   To: "Personal
 
 Submersibles General Discussion" <personal_submersibles at psubs.org>
   Received: Tuesday, December 9, 2014, 2:50
  PM
   
  
 Hi
  
  Hank,these
   people have some options.They
  have
   a standard 1/4"
 thick 36"
  diameter product.
   Are you
  
 
 going to be able to get out of your sub should the
  ballast
   tank
 break?Plastic
  
  Domes |
 Plastic Hemispheres | California Quality Plastics
   Plastic Domes and Spheres
 
 
         Plastic
  
 Domes | Plastic
  Hemispheres | California
   Quality...Acrylic
  Domes,
 Plastic Domes &
   Hemispheres
  HomePlastic Domes & Hemispheres Plastic
  
  Domes & Hemis Plastic
 Spheres Plastic Cylinders
  Plastic
   Bell Jars Camer...View
   on
 plastic-domes-spheres...Preview
   by
 Yahoo  
   Alan
      
 
      From: hank pronk
 
 via
   Personal_Submersibles
  
  <personal_submersibles at psubs.org>
   
   To:
  
 personal_submersibles at psubs.org
  
    Sent: Wednesday,
  
  December 10, 2014 8:36 AM
    Subject:
   [PSUBS-MAILIST]
 wanted
     
  
   Hi all,
   I am looking
 for
  a 36
   in ish dia
 acrylic dome.  The dome
  will not be a
 pressure
   dome.  I intend to
  remove the front ballast tank from Gamma
  
  and replace it with an
 acrylic dome.  The dome will act
  as
   the new ballast tank.  I discovered
  that sitting in the
   front
 of the sub, the
  visibility is quite
 acceptable if it
   were
 
 not for the steel ballast tank.  
   Any
   leads would be appreciated.
 
 
  Hank 
  
 
 _______________________________________________
   Personal_Submersibles mailing list
   Personal_Submersibles at psubs.org
   http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
   
   
    
     
   -----Inline
 Attachment
  Follows-----
 
 
  
   
  
 
 _______________________________________________
   Personal_Submersibles mailing list
   Personal_Submersibles at psubs.org
   http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
   
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
     
  
  -----Inline Attachment Follows-----
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
    
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 



More information about the Personal_Submersibles mailing list