[PSUBS-MAILIST] Email weirdness

[Pete Niedermayr]

Is it just me or is everyone getting multiple copies of the same message
--------------------------------------------
On Fri, 1/3/14, vbra676539 at aol.com <vbra676539 at aol.com> wrote:

 Subject: Re: [PSUBS-MAILIST] electrical junction box
 To: personal_submersibles at psubs.org
 Date: Friday, January 3, 2014, 5:53 AM
 
 If it's
 just a junction box (no breaker) then I agree. What's
 the point? Makes you wonder why that was done in the first
 place.
 Vance
 
 
 
 
 
 
 -----Original
 Message-----
 
 From: hank pronk <hanker_20032000 at yahoo.ca>
 
 To: Personal Submersibles General Discussion
 <personal_submersibles at psubs.org>
 
 Sent: Thu, Jan 2, 2014 8:17 pm
 
 Subject: [PSUBS-MAILIST] electrical junction box
 
 
 
 
 
 
 
 
 
 
 
 Gamma has an electrical junction between the motor and
 controller.  With the modification to the shaft seal
 assembly, the motor is closer to the controller now and
 I could simply connect the cables directly to the
 motor.   Is there a reason why the junction needs
 to be there.  A golf cart has the cables running
 directly to the motor.  Also the electrical panel has a
 main junction for all the functions.  That makes it
 like a rat nest of wires.  Why can't  the
 function wires simply run directly to the switch, witch is
 also the breaker in my case.  Any advice on this matter
 would be appreciated.  I personally like as few wires
 as possible and as short as possible and with as few
 connection points as
  possible.
 
 Hank
 
 
 
 
 
 
 
 
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
  
 
 
 
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles