[PSUBS-MAILIST] conical transitions

[seaquestor at gmail.com]

Hi Joe, the FEA model has it placed slightly toward the non cone side, but not any particular dimension. Primarily to stay away from the taper so to not add additional weld depth. Also, just to be clear, the ribs are on the outside the hull. We changed our design after seeing the presentation by Steve on the rework of his sub and a comment by Vance at the Psubs conference. That one change has opened the door to a better interior design that is not being predicated on rib spacing. It also means the a large number of design drawings are in the revision process. 

Best Regards,
David Colombo
SeaQuestor Industries

804 College Ave.
Santa Rosa, CA.
707.536.1424






Joe Perkel <josephperkel at yahoo.com> wrote:

>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140107/efdda436/attachment.html>