[PSUBS-MAILIST] Minn Kota 101 - thread spec

[Alec Smyth via Personal_Submersibles]

Hi Cliff,

It is a parallel thread, 1 1/8" - 18.

Best,

Alec


On Fri, Jul 18, 2014 at 8:04 PM, Cliff Redus via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

>  Does anyone have any documentation on the Minn Kota 101 main support
> female thread spec?  It does not look like a tapered pipe thread and the
> threads per inch look to great. I put a digital caliper on this at it read
> 1.064-1.07 inches for the minor diameter.  I measured the threads and it is
> 18 threads per inch.    I looked in the machine handbook and the closest
> that comes is a 1-1/8  UNEF (Extra fine thread series).  The major and
> minor diameters for a 1-1/8" UNEF are 1.1250" and 1.0649"  respectively.
>
> Can anyone confirm this?
>
> Cliff
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140718/321b11e5/attachment.html>