[PSUBS-MAILIST] Rolled steel

[swaters via Personal_Submersibles]

Huge,
I was just going off of what the blue prints said for a idea of what that would cost and several members on psubs asked for me to share the quote. I don't believe I will be doing the K-250 project anyway. 
Thanks,
Scott Waters




Sent from my U.S. Cellular© SmartphoneHugh Fulton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:Go with 3/8” thick it doesn’t buckle as much as ¼” 
The guys who welded my 5/16” said that it would have been half the time with 3/8”.  That is why ABS says minimum 3/8” I believe.
Best,  Hugh
 
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters via Personal_Submersibles
Sent: Tuesday, 17 June 2014 3:22 p.m.
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] Rolled steel
 
Hey guys,
I got a quote back from Arntzen on a K-250 hull.
The quote is to roll, tack seam, and reroll to round. 36"diameter and 48" long of 1/4" ASME 516 gr 70.
They will do it for $575 and a 2 week lead time.
Thanks,
Scott Waters
 
 
 
 
Sent from my U.S. Cellular© Smartphone


__________ Information from ESET NOD32 Antivirus, version of virus signature database 9956 (20140617) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 9956 (20140617) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140616/93e02b2a/attachment.html>