[PSUBS-MAILIST] Rolled steel

[swaters via Personal_Submersibles]

The end caps are eliptical. I had a source for end caps. Let me see if I can dig it up.
Thanks,
Scott Waters




Sent from my U.S. Cellular© SmartphoneMark via Personal_Submersibles <personal_submersibles at psubs.org> wrote:The quote is much cheaper than cheaper than I expected.  As you know, I would like to build a K-250.  Do you have a source and price for the end caps?  For the k-xxx, are the end caps hemispherical? 

Regards,

Mark Widman
910-638-5229

Sent from iPhone.

On Jun 17, 2014, at 9:16 AM, swaters via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Yea. They seem really good. 
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone

Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Scott, good news.  Prices seem psub friendly here in the Midwest.  I think this place is a good find as you are the third psuber to maybe use them. 

Steve


On Mon, Jun 16, 2014 at 11:22 PM, swaters via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Hey guys,
I got a quote back from Arntzen on a K-250 hull.
The quote is to roll, tack seam, and reroll to round. 36"diameter and 48" long of 1/4" ASME 516 gr 70.
They will do it for $575 and a 2 week lead time.
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140617/7a0db5f0/attachment.html>