[PSUBS-MAILIST] 12 Volt Charging Plug help

[kocpnt tds.net]

Hi Scott,

I just used two terminals from a 30 amp. 220 volt plug and wired one plug
to the charger. I'm assuming that the plugs will be inside the Sub however.
How will you vent the pods?

Best Regards,

Jim K


On Mon, Mar 10, 2014 at 10:58 AM, <swaters at waters-ks.com> wrote:

> Hey guys. I am trying to prep my sub for the West Virginia trip. One of
> the things on my list is to make it so I can charge the batteries without
> opening the pods. The connection to the pods is a XXL pipe with a cap and
> the opening is 1.10". I would like to hook up each battery (positive and
> negative) wire and some form of plug. This plug would need to be a male and
> female with two prongs (positive and negative for each 12V battery). One
> plug on the battery wire side which would fit in the 1.10" hole and the
> other plug on the charger side rather the alligator clips. I have seen
> plugs like this on golf carts and floor cleaning machines. Any idea where
> to get them? They need to be able to handle 20amps
> Thanks,
> Scott Waters
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140310/53a19b06/attachment.html>