[PSUBS-MAILIST] Galvanic Isolation

hank pronk hanker_20032000 at yahoo.ca
Sat Mar 15 11:40:19 EDT 2014


Hi John
Wow that is a big sub, I would like to hear more about it, size etc
Hank



On Saturday, March 15, 2014 9:30:57 AM, Jon Wallace <jonw at psubs.org> wrote:
  

Photos at http://www.subdb.info/project%20765

http://www.subdb.info/cgi/database/showvessel/albums/index.cgi?A=1383788795&B=1393881964&C=&D=Sanitary
Tank System


On 3/15/2014 9:09 AM, John Kammerer wrote:
> Hi All:
>
>  I am doing the piping for the boats sanitary tank system. I have two 
> thru-hull valves for pump out (1 1/2") and discharge to sea (1") via a 
> 24v Macerator pump. I am looking to isolate the ball valves from the 
> heavy wall collar penetration. There is the flange valve with gasket 
> and hardware insulators or a rated schedule 80 non-conductive PVC 
> close nipple.
>
>  Also I need to setup the two entry hatches with quick acting wheel 
> with 4 dogs to be operated from either side. I've looked at Juniper 
> Industries products and am looking for other options, any suggestions 
> appreciated.
>
>  John K.
>  Project 765
> (203) 414-1000
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

>

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140315/4a9c8abf/attachment.html>


More information about the Personal_Submersibles mailing list