[PSUBS-MAILIST] Gantry lift

Jim Rudholm jimrudholm at gmail.com
Mon Mar 31 17:58:13 EDT 2014


The book, "Design of Weldments" by Blodgett is available directly from the
James F. Lincoln Arc Welding Foundation, $15.00. Used from bookfinder.com,
$16.45 including shipping.
JimR


On Mon, Mar 31, 2014 at 1:09 PM, <swaters at waters-ks.com> wrote:

> Hey guys,
>
> I am wanting to build a gantry lift in my shop so I can put my sub on the
> trailer and take it back off the trailer without having to pay to rent a
> telehandler. It would need to hold the sub (4500 lbs) plus a little extra.
> I was thinking of building it out of I beams. I know nothing about
> structural design with I beams but I believe it should be pretty easy. The
> gantry lift would be 9' tall and 8' wide. What size I beams should I use?
>
> Also what is the best kind of winch or block and tackle device to use that
> is inexpensive?
>
> Thanks for the help,
> Scott Waters
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140331/be459c73/attachment.html>


More information about the Personal_Submersibles mailing list