[PSUBS-MAILIST] cart last days

[hank pronk via Personal_Submersibles]

Alec,
This project will take some time, and some experimenting.  I am using a 23cubic inch hyd motor to drive the cart.  I am not sure that will do it, so I am building it to take any motor.
Hank--------------------------------------------
On Sun, 10/26/14, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] cart last days
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Sunday, October 26, 2014, 9:07 AM
 
 What
 impresses me is that to most of us this would be a six month
 or year-long project, but I would not be surprised to see
 pictures in a day or two!
 Alec
 On Sat, Oct 25, 2014 at
 6:21 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 I just
 pushed my launch cart into the shop for the last time. 
 Tomorrow it will be reborn.  The cart is getting a new rear
 axel that steers via hyd cylinder, the front is getting a
 1/2 ton chev differential with a hydraulic motor to drive
 it.  The cart then gets two dual chamber pontoons that act
 as ballast tanks.  On top of one pontoon will be a 6 1/2 hp
 Honda motor that drives a hyd pump to power and steer the
 cart,  as well as a 24v alternator to charge my sub
 batteries.  I will be able to drive the cart with the sub
 on it down the boat ramp or beach or whatever into the
 water.  The cart will stay anchored in the water, until I
 am ready to put the sub on and drive back to my trailer.
 SWEET
 
 Hank
 
 _______________________________________________
 
 Personal_Submersibles mailing list
 
 Personal_Submersibles at psubs.org
 
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles