[PSUBS-MAILIST] Brushless Thrusters

[Sean T. Stevenson via Personal_Submersibles]

How much torque is required to slip your magnetic coupling?

Sean


On September 7, 2014 8:07:20 AM MDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Alan
>When I upgraded the cartridge seal in Gamma, I needed a pretty Beafy
>thrust bearing, it was no problem to get.  have since changer to
>Magnetic.   I think you could replace the bushing in a thruster with a
>ball bearing and never look back.  
>Hank
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-- 
Sent from Kaiten Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140907/681c4cf8/attachment.html>