[PSUBS-MAILIST] MK 101 shaft thread

[Alec Smyth via Personal_Submersibles]

I think maybe Jon is asking about the mounting shaft as opposed to the prop
shaft. Jon, that's 1 1/8" X 18 straight thread.

Best,

Alec

On Wed, Apr 22, 2015 at 2:18 PM, Cliff Redus via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Jon the shaft on the MK-101 is 1/2" diameter nominal (0.495"
> actual) with a threaded stud on the end that has a UNF 3/8-24 thread.
>
>
> Cliff
>
>
>
>
>
> Cliff Redus
> Redus Engineering
> USA mobile:  830-931-1280
> cliffordredus at sbcglobal.com
>
>   ------------------------------
>  *From:* Jon Wallace via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Wednesday, April 22, 2015 11:51 AM
> *Subject:* [PSUBS-MAILIST] MK 101 shaft thread
>
>
> I know somebody out there must have this info...what's the size and
> thread of the shaft that fits into the MK101 motor head?
>
> Jon
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150422/696c64a2/attachment.html>