[PSUBS-MAILIST] Fw: 12 Volt Reversing Continuous Duty Silver Contact Solenoid Relay for Winch Motor | eBay

Alan James via Personal_Submersibles personal_submersibles at psubs.org
Sat Aug 8 22:48:38 EDT 2015


Rick,G.L. specifies that you should have enough air to blow your ballast tanks at least 4 X.So 12 x that Scott gets is good.Alan
      From: Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, August 9, 2015 12:06 PM
 Subject: Re: [PSUBS-MAILIST] Fw: 12 Volt Reversing Continuous Duty Silver Contact Solenoid Relay for Winch Motor | eBay
   
Thanks Scott, that helps quite a bit.
Rick
On Sat, Aug 8, 2015 at 12:15 PM, swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org> wrote:



 Rick,There are tons of different sizes. I use Aluminum 80s for my sub.I also have Faber 95LP twin set for tec diving, and AL40 deco bottle. As well as several 80's. But 80's are common and cheap. I get about 6 dives per bottle on my sub, so with it's current configureation, can dive 12 times.Thanks,Scott Waters


Sent from my U.S. Cellular® Smartphone

-------- Original message --------
From: Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> 
Date: 08/08/2015 5:08 PM (GMT-06:00) 
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
Subject: Re: [PSUBS-MAILIST] Fw: 12 Volt Reversing Continuous Duty Silver Contact Solenoid Relay for Winch Motor | eBay 

I am looking into purchasing two aluminum scuba tanks that will be used for the MBT's and wondered what size people use for the K-350? I am not sure what the combined volume is for them. I was planning on using 80's but a dive shop here has a used 100 cu ft which I didn't know they made. I would like to go large to increase my cycle times before having to change them. Any input appreciated.
Rick
On Tue, Jul 21, 2015 at 6:25 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

James, this is what I use with total success, you can get different amp ratings even up to 500a
Hank

--- On Tue, 7/21/15, hank pronk <hankpronk at live.ca> wrote:

> From: hank pronk <hankpronk at live.ca>
> Subject: 12 Volt Reversing Continuous Duty Silver Contact Solenoid Relay for Winch Motor | eBay
> To: "hanker_20032000 at yahoo.ca" <hanker_20032000 at yahoo.ca>
> Received: Tuesday, July 21, 2015, 11:23 AM
>
>
>
> http://www.ebay.com/itm/12-VOLT-REVERSING-CONTINUOUS-DUTY-SILVER-CONTACT-SOLENOID-RELAY-for-WINCH-MOTOR-/281165700963?pt=LH_DefaultDomain_0
>
>
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150809/adc975fa/attachment-0001.html>


More information about the Personal_Submersibles mailing list