[PSUBS-MAILIST] penetration schedule

Alec Smyth via Personal_Submersibles personal_submersibles at psubs.org
Fri Aug 14 16:03:49 EDT 2015


I believe the point is that brass/bronze/copper is less likely to ignite
than SS, so they avoid using SS for piping in the O2. Plus, you need to
clean everything so the fact its removable facilitates cleaning. Having
said that, on Snoopy it all goes through SS -- but there's a regulator
directly on the tank so I'm only dealing with low pressure O2. It is the
high pressure lines that are most critical.

Alec

On Fri, Aug 14, 2015 at 3:32 PM, Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Have the book.    Yes Oxygen is interesting stuff, not to be messed with
> !   Can make anything combustible.  Still not clear on the bronze issue
> however.
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Alec Smyth via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] penetration schedule
> Date: Fri, 14 Aug 2015 10:10:01 -0400
>
>
> Hi Brian,
>
> I highly recommend a very small yet invaluable book Dan Lance once pointed
> me to. It is called The Oxygen Hacker's Companion, and the author is Vance
> Harlow. Oxygen is one area with specialized requirements that, if ignored,
> can result in a really bad day. Please be sure to read that book before you
> build anything that will handle O2.
>
> Best,
>
> Alec
>
> On Thu, Aug 13, 2015 at 11:58 PM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Hank,
>              Can I put a bronze bushing in a ss coupling, if that is
> necessary for the O2?   Does the O2 need to not go through stainless?
>
>   I had a bad experience connecting stainless nipples into a
> stainless 90,  it galled so bad that I ruined the nipple getting it out of
> there. Maybe I just need to use more Teflon tape.
>
> brian
>
>
>
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org
> >
> To: "Personal Submersibles General Discussion" <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] penetration schedule
> Date: Thu, 13 Aug 2015 20:46:45 -0700
>
> Hank,
>              It seems to me that it's easier to weld in couplings rather
> than nipples, I suppose it's just preference.   I sort of have a trim tank
> already with my forward hard ballast tank, I'm just not sure at this point
> whether or not that will be enough control.  A way to deal with varying
> loads is probably something I need to address, but I don't want to give up
> valuable cabin space for it.
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] penetration schedule
> Date: Thu, 13 Aug 2015 18:23:16 +0000 (UTC)
>
> Brian,
> I would add a few nipples and cap them off, you will want them down the
> road.
> A trim tank may be a good idea for such a heavy sub, unless you have real
> powerful vertical thrusters.  I find when I take a passenger, even my
> daughter Roman who is light as a feather, I am always quite over weight.
> That is no problem at all in a Gamma size sub because the vertical
> thrusters have enough jam to stop the sub hitting bottom.  A trim tank
> would be good to keep you closer to ideal weight, or have lots of small
> weights to take out.  I foolishly made two rather heavy lead weights.
> Are you running your O2 through a ss nipple, is that okay, I am planning
> to do that for external O2.  I remember talk about the K subs needing a
> Bronze fitting or something like that.
> Hank
>
>
>
> On Thursday, August 13, 2015 11:52 AM, Brian Cox via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
>
>
> Hank,
>             Here are all my penetrations:
>
> Front hard ballast tank
>  1.   flood valve -  1/2" ss rod thru hull
>  2.   vent valve
>  3.  air inject    -  ss coupling
>
> Main ballast tank (soft)
>  1. flood valve  - ss 1/2" rod thru hull
>  2. air inject
>
> mechanical penetrations:
>   1.  front flaps       - ss 1/2" rod thru hull  (all)
>   2. back flaps
>   3. motor turning   ( steering )
>
> Breathing Oxygen  -  3/4" coupling  or smaller  ( will bush)
>
> Flood Valve  - 1 1/2"  - ss coupling  ( near bottom)
>
> main ballast HP air in   -
>   #1 - 3/4"  ss coupling
>   #2 - 3/4"     ( will have bushings to 1/2" or smaller)
>
>
> Gauges
>   1.  Temperature  - 1/2"   ss coupling
>    2.  Pressure -    1/2"
>
> Release buoy
>   1.  1/2" SS rod thru hull
>
> Equalizing valve
>   1.  3/4" coupling
>
> Drop weight
>    1.  7/8" ss rod thu hull
>
> Hatch dog thu hull
>  1.  7/8" ss rod
>
>  Is there anything that I obviously forgot ??      All my electrical will
> be going through a separate viewport fitting.
>
> So far I have the front trim, hatch , but no air yet.
>
> Not sure if I want to have a small trim tank in the main cabin or not.
>
>
> Brian
>
>
>
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150814/57fa3e93/attachment-0001.html>


More information about the Personal_Submersibles mailing list