[PSUBS-MAILIST] Fw:

[hank pronk via Personal_Submersibles]

Alec,I was hoping the wash would go around the motor, I have no experience with this, but it makes sense. :-(  I will move it back.  My original plan was to have them up front vectored 45 degrees, but they are very heavy, over 40 lbs each and that takes away from the buoyancy for the arm.Hank 


    On Wednesday, December 2, 2015 12:04 PM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 If it were me, I'd move it just a little bit aft, just enough to leave the vertical one unrestricted. I don't think you'll have any trouble at all rotating the boat if the thrusters are not exactly in the middle.
Best,
Alec
On Wed, Dec 2, 2015 at 1:57 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi All,This is a picture of my proposed thruster location, I am not sure if the motor in this location will interfere with the prop wash from the vertical thruster inside the can above the thruster.
What do you guys think?  I want the motor as mid ship as possible for best steering.  This location is also good for cabling to the pen plate   Hank     On Wednesday, December 2, 2015 11:51 AM, xxx xxxxx <mp13 at live.ca> wrote:
 

  


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151202/bc85fc14/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0233.jpeg
Type: image/jpeg
Size: 19210 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151202/bc85fc14/attachment-0001.jpeg>