[PSUBS-MAILIST] Fw: hatch

[Cliff Redus via Personal_Submersibles]

Hank, can you resend with a higher resolution picture.  I can't see the
details of your Christmas holiday.

Cliff

On Tue, Dec 29, 2015 at 11:26 AM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Here is the efforts of the xmas holliday.  This is the hatch for my deep
> diver, the shell  is 15\16 thick  and the ring is 2 inches thick.  I
> machined a notch for the shell to sit on and then welded it in place.  I
> then machined the weld down to make it nice and even and it looks better
> than grinding.  The hatch weighs quite a bit, I am guessing 100 lbs.
> I had the land ring machined and then cut the hole in the hull to big,
>  :-(  so I am having a new ring water jet cut.  I made a real nice rig to
> hold the torch with bearings and tilt feature.  I had the angle wrong, so
> the hole ended up 3\8 to big.
> Hank
>
> On Tuesday, December 29, 2015 10:18 AM, xxx xxxxx <mp13 at live.ca> wrote:
>
>
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151229/5a3a097d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0264.jpeg
Type: image/jpeg
Size: 17547 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151229/5a3a097d/attachment.jpeg>