[PSUBS-MAILIST] electro plating

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Wed Dec 30 18:33:46 EST 2015


Alan,I better do some experimenting I guess.  I only need enough to create a corrosion barrier.  Hank 

    On Wednesday, December 30, 2015 4:01 PM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,an electroplated surface would be a pain to repair if you needed to.A massive job getting the plating off & re-doing it. It can bubble or peelif the surface isn't prepared properly. I worked for an electroplating firm30+ years ago. Alan

Sent from my iPad
On 31/12/2015, at 2:45 am, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi All,Has anyone looked at electro plating a hatch and land mating surface.  That is my plan, first copper, then nickel.   I can do it myself at home. Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151230/adf40505/attachment-0001.html>


More information about the Personal_Submersibles mailing list