[PSUBS-MAILIST] Manipulator

[hank pronk via Personal_Submersibles]

Plus the water pressure pushing against you 5/8 rods--------------------------------------------
On Wed, 2/11/15, swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Manipulator
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Wednesday, February 11, 2015, 12:23 PM
 
 Do you
 have any problem with over pressure though? The pnuematic
 cylinders are rated to 150psi with air and 1000 psi with
 oil. Thanks,Scott
 Waters
 
 Sent from my U.S.
 Cellular® Smartphone
 
 -------- Original message
 --------
 From: hank pronk via
 Personal_Submersibles
 <personal_submersibles at psubs.org> 
 Date:02/11/2015  11:12 AM  (GMT-06:00) 
 To: personal_submersibles
 <personal_submersibles at psubs.org> 
 Cc:
  
 Subject: Re: [PSUBS-MAILIST] Manipulator
 
 
 hi Scott
 use a
 hydraulic pump just the same as if you used hydraulic
 cylinders
 Hank           
 
                 
                     
 
                     
                         
                             
                             
                                 From:
                             
                             swaters at waters-ks.com via
 Personal_Submersibles
 <personal_submersibles at psubs.org>;                    
        
 
                             
                                 To:
                             
                             psubs
 <personal_submersibles at psubs.org>;                    
                                                         
 
                             
                                 Subject:
                             
                             [PSUBS-MAILIST] Manipulator     
                       
 
                             
                                 Sent:
                             
                             Wed, Feb 11, 2015 3:39:07 PM    
                        
 
                         
                             
 
                             Hank,I know you
 said to use pnumatic cylinders  for the manipulator arm.
 What kind of pump do you
 use?Thanks,Scott Waters
 
 Sent from my U.S.
 Cellular®
 Smartphone
                     
                 
             
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles