[PSUBS-MAILIST] K-250 Hatch Dome Removal Question

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Wed Feb 11 17:19:41 EST 2015


Steve,
In that case, I see a new saws all blade in your future :-)
Hank --------------------------------------------
On Wed, 2/11/15, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] K-250 Hatch Dome Removal Question
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Wednesday, February 11, 2015, 3:54 PM
 
 All, I
 am removing my old K-250 hatch dome.  It looks like it has
 been installed with a product like Sikaflex (I'd
 guess).
   
 I would like to not destroy it if possible (or the
 hatch).  It really doesn't want to come out.
 
 I am thinking about heating the hatch's metal ring
 where the dome is seated to maybe break down the sealant or
 soften the acrylic.  I have a concern about the heat
 warping or otherwise affecting the metal of the hatch.
 
 Any input?
 
 Steve
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 



More information about the Personal_Submersibles mailing list