[PSUBS-MAILIST] Fw:

[hank pronk via Personal_Submersibles]

Scott,
I think you should build from 516-70 for those very reasons.  I just wanted to find some because you said you were having trouble finding it. Make it thicker with 516-70 then add buoyancy sphere's to compensate.  

Hank--------------------------------------------
On Thu, 1/8/15, swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Fw:
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Thursday, January 8, 2015, 9:11 PM
 
 Hank I
 have two concerns about the HY-100. 1) Cost.
 Dan has told me in the past HY-100 or HY-80 is 3 time the
 price per pound than 516 gr 70. Not sure dollar wise what
 that will be2) Welding process. Dan told me that
 this is very difficult to weld. You have to put it in a kiln
 to pre heat and weld inside it at 500 degrees. After that he
 said it still cracks and you have to gouge and reweld no
 matter how good a welder you are and you have to reweld
 it. 
 There is obviously alot of research I have to do
 to understand it first. 
 What is the supplier Hank?
 Thanks,Scott Waters
 
 Sent
 from my U.S. Cellular® Smartphone
 
 -------- Original message --------
 From: hank pronk via Personal_Submersibles  
 Date:01/08/2015  7:56 PM  (GMT-06:00) 
 To: personal_submersibles at psubs.org 
 Subject: [PSUBS-MAILIST] Fw: 
 
 Scott,
 I found HY-100 supplier with 1 ton min order
 Hank
 
 --- On Thu, 1/8/15, hank pronk <hankpronk at live.ca>
 wrote:
 
 > From: hank pronk <hankpronk at live.ca>
 > Subject: 
 > To: "hanker_20032000 at yahoo.ca"
 <hanker_20032000 at yahoo.ca>
 > Received: Thursday, January 8, 2015, 8:54 PM
 > 
 > 
 > 
 >   		 	   		  
 >
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles