[PSUBS-MAILIST] Greetings

[Emile van Essen via Personal_Submersibles]

Hi Petar,

 

Welcome. I made an number of submersible dives near Cavtat; great!

 

In the book "handbook of acrylics" by Jerry Stachiw are also sealing and
retaining options described.

The book is expensive . So the library or scans might be an option.

 

Regards, Emile van Essen

 

  _____  

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
Namens Petar Topljak via Personal_Submersibles
Verzonden: maandag 12 januari 2015 17:10
Aan: Personal_Submersibles at psubs.org
Onderwerp: [PSUBS-MAILIST] Greetings

 

Hi everyone,

My name is Petar and I am a mechanical engineering student from Croatia. I
was informed about this maillist by James from England who built his own
submersible. 

I have a project for my uni, where I have to design acrylic viewport. I
already downloaded ASME PVHO-1-2007 standard, and I decided to go with
spherical sector with conical edge viewport. I finished all of the
calculations but ran into problems with sealing arrangement and retaining
ring on this type of window.  
I don't know how to arrange seals, and the picture in standard is not very
informative, so any kind of help will be precious

Kind regards, Petar Topljak

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150112/59ee8f7e/attachment.html>