[PSUBS-MAILIST] Manipulator arm

[Hugh Fulton via Personal_Submersibles]

Hi Scott,
Plenty of hydraulic cylinders but you need to make sure they are Aluminium
bodies and SS shafts.  Most are steel with Chromed shafts which wont last
five minutes.

Hugh



-----Original Message-----
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of hank pronk via Personal_Submersibles
Sent: Wednesday, 21 January 2015 2:35 p.m.
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] Manipulator arm


Are you using hydraulic cylinders or air cylinders.
Hank--------------------------------------------
On Tue, 1/20/15, swaters at waters-ks.com via Personal_Submersibles
<personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] Manipulator arm
 To: "psubs" <personal_submersibles at psubs.org>
 Received: Tuesday, January 20, 2015, 7:51 PM
 
 Does
 anyone have a reccomendation on a source for hydrolic  cylinders? Ofcourse
there are tons online, just wondering if  someone has a particular place
they like to get  them.Thanks,Scott Waters
 
 Sent
 from my U.S. CellularR
 Smartphone
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 11047 (20150120) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 11047 (20150120) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com