[PSUBS-MAILIST] HY-80

[hank pronk via Personal_Submersibles]

Scott,
What are you getting for your 76K  are theses segmented heads. Will the supplier weld the heads together along with the CT nozzle and window frames etc.  That is a reasonable number to deal with, you could possibly have a hull for 100K.  Well done!
Hank --------------------------------------------
On Wed, 1/28/15, swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: [PSUBS-MAILIST] HY-80
 To: "psubs" <personal_submersibles at psubs.org>
 Received: Wednesday, January 28, 2015, 10:06 AM
 
 Hey
 guys. I found my HY-80! For two 66" hemispherical heads
 1"nom the cost is $76,250 with a 12 week lead time. It
 is going to take me a while to design and source out
 everything I need, but I am going to keep on moving twords
 this project while also upgrading my K-350 with a 6 function
 manipulator arm with cutting grapple and 5 funtion tooling
 arm with interchangable
 tooling. Thanks,Scott
 Waters
 
 Sent
 from my U.S. Cellular®
 Smartphone
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles