[PSUBS-MAILIST] LED test

[hank pronk via Personal_Submersibles]

I can't tell what happened, the entire assembly was potted 1 inch deep, there was no heat, the housing was not even warm.  It is still drawing power, just no light.  Probably an electronic component overheated.
Hank--------------------------------------------
On Thu, 7/23/15, Clifford Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] LED test
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Thursday, July 23, 2015, 1:28 PM
 
 What was
 the failure mode?  Water in the housing or overheating? 
 
 On Thu, Jul 23, 2015 at
 1:44 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 Cliff,
 
 You were right, the light quit after about 45 min in the
 water :-(
 
 Hank
 
 _______________________________________________
 
 Personal_Submersibles mailing list
 
 Personal_Submersibles at psubs.org
 
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles