[PSUBS-MAILIST] roundness

[Brian Cox via Personal_Submersibles]

Hank,  You have a plan for getting out of the pod ?

Brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] roundness
Date: Fri, 24 Jul 2015 12:20:58 -0700


Brian,
I think a good fabricator will provide what you ask for.  Edmonton Exchanger is a pretty Kik Ass outfit.
Building an escape pod may seem excessive I suppose, but I am just not feeling comfortable at depths that I can not swim out of.  I can build the pod for under 5K, that seems like pretty cheap insurance.  Remember I am not a diver and I will spend most of my time at 400feet.  
I did consider building a second Gamma, just make a copy. It is much cheaper to build a pod and pretty quick also.  I am not sure I could build a replica Gamma by spring.  

Hank --------------------------------------------
On Fri, 7/24/15, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] roundness
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Friday, July 24, 2015, 1:01 PM
 
 Basically what it boils down to is
 how humanly possible it is to get it as near as perfect as
 you can.  If you first instruct the fabricators to get
 it as close as possible, then you need to go from
 there.  You can always massage it into a perfect sphere
 by using the proper amount of leverage. 
 
   It seems to me, though, if you're going to have an
 escape pod you might as well just build another sub for all
 the trouble it will be worth.
 
 Brian 
 
 --- personal_submersibles at psubs.org
 wrote:
 
 From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
 Subject: Re: [PSUBS-MAILIST] roundness
 Date: Fri, 24 Jul 2015 11:04:30 -0700
 
 I see you are a visual guy like me.
 Hank
 --------------------------------------------
 On Fri, 7/24/15, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
  Subject: Re: [PSUBS-MAILIST] roundness
  To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
  Received: Friday, July 24, 2015, 12:00 PM
  
  Hank,   I would
  certainly say no more that this !  See Picture
  
  Brian 
  
  --- personal_submersibles at psubs.org
  wrote:
  
  From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
  To: personal_submersibles at psubs.org
  Subject: [PSUBS-MAILIST] roundness
  Date: Fri, 24 Jul 2015 10:35:08 -0700
  
  Hi All,
  Can someone tell me the allowable out of roundness
  percentage is for a sphere hull.
  Hank
  _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
  
  
  -----Inline Attachment Follows-----
  
  _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles