[PSUBS-MAILIST] LED Lights

Alan James via Personal_Submersibles personal_submersibles at psubs.org
Sun Jul 26 21:33:37 EDT 2015


Hi Ken,I like the idea of the 2000lm option as well. I have read comments on scuba sitesthat 2000lm is too much, so being able to drop to that may be handy from the too much light perspective, as well as for out of water use.I can't remember seeing any underwater lights with a dimming option.Here is a $5- LED dimmer not sure if it's suitable but there are some cheap options out there.XY-D-RK01 Mini Manual LED Light Strip Dimmer - Beige (12~24V)
|   |
|   |  |   |   |   |   |   |
| XY-D-RK01 Mini Manual LED Light Strip Dimmer - Beige ...I like this from DX. Find the cool gadgets at a incredibly low price with worldwide free shipping here. |
|  |
| View on www.dx.com | Preview by Yahoo |
|  |
|   |

Most LED flashlights I have seen have 3 or 5 modes, which are low light options& include a strobe mode that fishermen have found is good for attracting fish.Regarding the drive signal to the light for the switching option; wouldn't it be as simple as having a switch to turn on the main power to the lights & then a potentiometer that is wired to 12 volts that clicks through 3 stages to signal 2,5,or 10,000lm switching in the light housing electronics.Better still a potentiometer with intergral switch.Alan
      From: Ken Martindale via Personal_Submersibles <personal_submersibles at psubs.org>
 To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org> 
 Sent: Monday, July 27, 2015 12:23 PM
 Subject: Re: [PSUBS-MAILIST] LED Lights
   
#yiv7725897173 #yiv7725897173 -- _filtered #yiv7725897173 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv7725897173 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv7725897173 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv7725897173 #yiv7725897173 p.yiv7725897173MsoNormal, #yiv7725897173 li.yiv7725897173MsoNormal, #yiv7725897173 div.yiv7725897173MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv7725897173 a:link, #yiv7725897173 span.yiv7725897173MsoHyperlink {color:blue;text-decoration:underline;}#yiv7725897173 a:visited, #yiv7725897173 span.yiv7725897173MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv7725897173 span.yiv7725897173EmailStyle17 {color:#1F497D;}#yiv7725897173 .yiv7725897173MsoChpDefault {font-size:10.0pt;} _filtered #yiv7725897173 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv7725897173 div.yiv7725897173WordSection1 {}#yiv7725897173 Down to 10% or 20% of the 10,000 lumens or 1000 to 2000 lumens.  You are right about sending a current down the third wire but that complicates the drive signal external to the light.  Do any of the existing lights have dimming?  I know we are sizing this light like the 5000 lumen light but this light will be larger.  One other thing, this light will not operate very long without cooling (in air) unless we have a large heat sink. It will not be damaged or degraded if left on in air but will shut off and then back on after cooling. I don’t think we ought to have operation in air as a requirement.  Ken  

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan James via Personal_Submersibles
Sent: Sunday, July 26, 2015 7:36 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] LED Lights  Cliff,I'm getting confused here. You are advocating the subconn 3 pin conectorbut on your 5000lm light you have a 5 pin connector.Did you say you had a number of 3 pin connectors?Even with the 3 pin connectors it would be easy to have "switching" by sendinga small current down the 3rd pin. 4 pin & we have anologue dimming.Perhaps we could have a wiring option for just the 3 pins & one for dimming.Ken, how low can we go with switching? Could we have 2000, 5000 & 10,000lmoptions? Just trying to clarify our options & the difficulty involved    From: Clifford Redus via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
Sent: Wednesday, July 22, 2015 2:54 PM
Subject: Re: [PSUBS-MAILIST] LED Lights  Alec, on the work we did on the 5000 lumen LED, you had to be very careful that you designed heat sinks in the housing to dissipate heat  or the manufacture solder joint would fail.  The 5000 lumen  Vero 18 has a diameter of 3.6 cm.  The Vero 29, is 4.9 cm or only about 40% larger.  My major concern on packaging 4 of these little beast in one housing is that it is going to pull quite a bit of power and generate a lot of heat to dissipate.  Even though you would save money on connectors as you say, I would like to see us stick with one Vero 29 arrays per housing to make it easier to deal with the heat and keep from drawing so much current.  Also with the smaller housing,  if we limit the max depth of say 1000 fsw, it would be easy to handle the pressure with a 1-atm housing.  Also if we stick with one Vero 29 array per light, we can design the light so that it won't have be submerged to operate.  The 5000 lumen light I have will blind you.  Can't imagine what a 10,000 lumen version would be like let alone a 40,000 lumen light!  Not locked to anything at this point.     Cliff      On Tue, Jul 21, 2015 at 8:59 PM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
I was not familiar with the Vero 29 but just looked it up and I see it's under 5cm in diameter and less than 2mm thick! Wow, that means we're talking about a really small little device despite the hefty lumens output. Since the packaging is so small, and given the current draw is about 4 amps... do you guys think it might be worth making an array of four of these Vero 29s into each light? The cost of machining would likely not be that much more, and the cost of the Subconn connector identical, so it might be quite a bit more economical per lumen to go with a little array of four. It would be a ridiculous number of lumens, ridiculous is good in this case and we're still at a size that would fit very easily on any sub.  A first stab at housing decisions, not very premeditated:  - Oil filled, so that depth rating is immaterial. In my case I would need it to go to 1000 feet, or more if I wanted it to go on the sub during a depth test.- Aluminum housing, for ease of machining and corrosion resistance. - Flexible plastic lens, to act as a compensation bladder for thermal expansion.- Subconn connector, not because you need the pressure rating but because it will keep the oil in reliably!  Just some initial ideas, I don't own the truth.    Best,
Alec   On Tue, Jul 21, 2015 at 8:34 PM, Clifford Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Ken/Alan/Alec/Jon    More Thoughts  After Jon sets up a place were we can collaborate and share files, if it would be helpful, I could post the drawings I have for 5000 lumen flat body 1-atm LED light and a  short video of the 5000 lumen LED in operation.  My thinking is in order to fast track the project we could take this design as a starting point and just geometrically scale up the housing  just large enough to fit 10000 lumen Bridgelux Vero 29 and its support base.  Should be plenty of room for a larger diameter PCB that Ken can design. We should be able to use the same  Subconn MCBH-3MP connector.  We get a good discount on Subconn connectors through Psubs.  This design uses a hard anodized 6061-T6 for the housing and a 3/8" borosilicate glass for the lens.  The lens was an OTS item from McMaster Carr. This design did not have a reflector but it would be easy to incorporate after we settle on beam angle.    To me, the key is to work as group on the draft spec that Ken comes up with.  From the housing perspective, the key items the spec needs to call out are :  1) design depth, 2) 1-atm vs  oil pressure compensated, 3) housing material 4) type of electrical penetrator    I have Autodesk Inventor Professional loaded on my PC.  Using feedback from the group I can use Inventor to generate fabrication drawings an do the FEA work. After we freeze the design, we take Alec up on his offer to machine the housing.  If for any reason, he can't , I can use the machine shop I work with to machine the housing. After we have the prototype, I can test it in my test chamber.  For those that don't have Inventor, Autodesk has a nice 3-D viewing software that the team should be able to download for free and to view and critique design iterations.  
Cliff           On Tue, Jul 21, 2015 at 6:15 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Hi Ken,a few thoughts once you have settled on the electronics are.....Do we want a hard anodized aluminium housing?Do we want the housing oil filled?What sealing configuration do we want?What beam angle do we want?What sort of reflector?What sort of lense?How are we going to seal the cable coming in to the housing?   Some of these answers may be dictated by what is available offthe shelf at a reasonable price.Cheers Alan    From: Ken Martindale via Personal_Submersibles <personal_submersibles at psubs.org>
To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org> 
Sent: Wednesday, July 22, 2015 5:16 AM
Subject: Re: [PSUBS-MAILIST] LED Lights  The electronics and custom PWB won’t be the issue. Figuring out what we want may be the biggest problem. Ken   From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Clifford Redus via Personal_Submersibles
Sent: Thursday, July 16, 2015 3:52 PM
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] LED Lights Alan, we have a lot of collective experience we could use on the project.  I really love the fact that Ken is an EE with experience LED drivers.  After we agree on specs and packaging I am sure he can design a custom PCB for the electronics.  Having just gone through the exercise of designing a 1-arm housing, I don't think it will be difficult to design the housing.

Cliff
On Thursday, July 16, 2015, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Cliff,I'm on board with the LED light project.Have done a bit of experimentation & bought about 10 different LEDflashlights, underwater flashlights, flood lights & various lenses.I also have a friend whose working involves running banks of LEDlights on advertising hordings, if we get stuck on the technical side.Alan From: Clifford Redus via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
Sent: Friday, July 17, 2015 2:15 AM
Subject: Re: [PSUBS-MAILIST] LED Lights Ken, I have been off the list for some time due to work and due to my email service not passing through psub emails.  I had to go to a gmail email account to get back in the loop. I am in on your suggestion to build LED psub light based on the Bridgelux Varo 29 (BXRC-50C 10K0-L-24) .   I can help on the housing design and I have access to a machine shop to fabricate the housing. I also have test chamber we can use to qualify the prototype.  Maybe we could pick one of the DeepSea Power and light LEDs take its specifications and tweak to fit a typical psubs application.   We would probably need to set up something like Dropbox location, accessible to all that want to participate in the design, fabrication and testing to keep from swamping the PSUB  list. I have a function LED subsea light that works fine but would like more lumens.  It is a 5000 lumen light but would like a 10,000 lumen light. My suggestion is for you take the point since you came up with idea.  Maybe we could canvas the site and see would be interested in working on the project as a first step.  Given your background in EE, maybe you could come up with a first pass at the specification and we can comment on it. Cliff     
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
    _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150727/9cd34f94/attachment-0001.html>


More information about the Personal_Submersibles mailing list