[PSUBS-MAILIST] LED light bar

[Alan James via Personal_Submersibles]

Hank,the led electronics I've looked at in some of my lampshave electrolytic capacitors in them, which can crush under pressure.So "if" it fails at depth this may be a heads up as to why.Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: personal_submersibles at psubs.org 
 Sent: Monday, June 22, 2015 12:09 PM
 Subject: [PSUBS-MAILIST] LED light bar
   
Success, my new light bar is installed and full of oil.  It was remarkably easy, the end caps come off the bar and are quite heavy, so tapping a 1/8 pipe thread was easy.  I filled the light while the end cap was off then reassembled it and topped it up through the hose fitting.  I have a p trap line (1/8 nylon)  and the whole conversion takes less than an hr.  The light works just fine, maybe not as bright as my halogen lights but much easier on power.  The light runs on 10 amps at 24V. 24,000 lumen
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150622/7c224b80/attachment.html>