[PSUBS-MAILIST] LED light bar

[Rick Patton via Personal_Submersibles]

any pictures Hank?
Rick

On Sun, Jun 21, 2015 at 2:09 PM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Success, my new light bar is installed and full of oil.  It was remarkably
> easy, the end caps come off the bar and are quite heavy, so tapping a 1/8
> pipe thread was easy.  I filled the light while the end cap was off then
> reassembled it and topped it up through the hose fitting.  I have a p trap
> line (1/8 nylon)  and the whole conversion takes less than an hr.  The
> light works just fine, maybe not as bright as my halogen lights but much
> easier on power.  The light runs on 10 amps at 24V. 24,000 lumen
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150621/893ebbec/attachment.html>