[PSUBS-MAILIST] Gamma ring machining

[Brian Cox via Personal_Submersibles]

Hank,  are you going to be turning the whole fricking sub ?

Brian 

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] Gamma ring machining
Date: Thu, 5 Mar 2015 18:00:24 -0800

Today my welder came to my shop and welded the reinforcing ring into Gamma, 10 passes, looks perfect!

Next step, machine the ring.  I am going to make a flange facing machine from a one ton  truck full floater differential hub and a part or two borrowed from my spare lathe.  The rig will be hydraulic drive.  This may or may not work.  :-)  If it works and I am confident it will, I can also face CT lands, with the CT welded in place.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles