[PSUBS-MAILIST] Fiberglass

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Mon May 4 11:54:52 EDT 2015


Brian,
I use a different method than Alec, Alec's method is better for a very complex part.  I take donor fiberglass like truck canopy's shower stalls and what ever is around.  I cut the sections I need out of the donor material and fiberglass it together.  In your case if your going to use plywood, substitute with fiberglass panels.  
Hank
--------------------------------------------
On Mon, 5/4/15, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Fiberglass
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Monday, May 4, 2015, 11:25 AM
 
 I have a question on
 fiberglass,  I'm probably going to have some
 fiberglass faring in places, if I do fiberglass over
 1/8" plywood will there be any issue with the
 compression crushing the wood?    if the wood
 has some resin soaked into it I would think it would be
 quite strong. Brian
 
 --- personal_submersibles at psubs.org wrote:
 
 From: via Personal_Submersibles
 <personal_submersibles at psubs.org>
 To: "psubs"
 <personal_submersibles at psubs.org>
 Subject: [PSUBS-MAILIST] Fiberglass
 Date: Mon, 04 May 2015 06:22:09 -0700
 
  Alec,
  
 I was curious if you could go into details about the
 making of your saddle tanks?
  
 *Where did you get the foam and fiberglass and what
 types did you use
 *How did you shape the foam to ensure symmetry 
 *Was there any difficulty or anything you would do
 differently
  
  
 Thanks,
 Scott Waters
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 



More information about the Personal_Submersibles mailing list