[PSUBS-MAILIST] Fw: New listing Titanium Sphere TANK (24"diameter)

[hank pronk via Personal_Submersibles]

I assumed that since the sphere has a high pressure rating and would just be used for buoyancy, it could be used under pressure.  Of coarse there would be a small loss of buoyancy, but it would go much deeper. 
Hank 
--------------------------------------------
On Fri, 5/8/15, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Fw: New listing Titanium Sphere TANK	(24"diameter)
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Friday, May 8, 2015, 1:31 AM
 
 
     Assuming that the quoted diameter is correct, and that
 there exists
     a slight discrepancy from the quoted weight (which could
 be the
     fitting shown in the EBay photographs), I get a wall
 thickness of
     about 3/16", and a 1500' operating depth for
 that sphere:
 
     
 
     
 
     
   
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles