[PSUBS-MAILIST] Distortion when cutting in shell

André Eriksen via Personal_Submersibles personal_submersibles at psubs.org
Fri May 8 17:10:03 EDT 2015


Hi all,

When you cut out the hole for the conningtower, is distortion of the shell
an issue?

My shell is 12mm in thickness. Wondering if I should place a reinforcement
ring on either side of the hole to be cut -Not welding them so I can remove
them after I have tacked the tower in place.


Thanks
André
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150508/a44263c3/attachment.html>


More information about the Personal_Submersibles mailing list