[PSUBS-MAILIST] Tank Calculator

[Sean T. Stevenson via Personal_Submersibles]

Head height is the inside height of the head from the tangent (bend line). Length of skirt, or straight flange length, is the length of the cylindrical portion alone, taken again from the tangent or bend line.

On May 11, 2015 4:12:24 AM MDT, James Frankland via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Hi All,
>Can someone please clarify something for me on the psubs 2:1 tank
>volume
>calculator.
>
>"Length of Skirt".  Is this the total height, ie from the centre to the
>edge of the tank head?  Or from the edge to the corner\knuckle radius?
>
>My tank heads are these ones.
>
>http://www.purdie.co.uk/products/2-1_semi_ellipsidal.php
>
>Many thanks
>James
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-- 
Sent from Kaiten Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150511/21e3358d/attachment.html>