[PSUBS-MAILIST] Seals

Alan James via Personal_Submersibles personal_submersibles at psubs.org
Wed May 13 16:27:59 EDT 2015


Correction, looking for seal for 1/2" propeller shaft.Alan
      From: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Thursday, May 14, 2015 7:43 AM
 Subject: [PSUBS-MAILIST] Seals
   
Anyone familiar with the opposed dual spring loaded lip seal for the separation
of two fluids?
http://www.ceetak.com/wp-content/uploads/2011/05/Ceetak-Rotary-Shaft-Seals-Brochure.pdf
It "seems" the ideal seal for an oil compensated thruster, where you are keeping water out & oil in.  Am trying to find the right type of seal to fit on a 10mm propeller shaft that will run at up to 3000 rpm. 250 psi max pressure.
Regards Alan
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150513/d0449861/attachment-0001.html>


More information about the Personal_Submersibles mailing list