[PSUBS-MAILIST] LED lights

[Clifford Redus via Personal_Submersibles]

Good to know.


Cliff Redus

> On May 17, 2015, at 6:03 PM, swaters at waters-ks.com via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Cliff,
> My 10,000 lumen head light is oil compensated in mineral oil. So far has worked flawlessly and does well to dissapate heat.
> Thanks,
> Scott Waters
> 
> 
> Sent from my U.S. Cellular® Smartphone
> 
> 
> -------- Original message --------
> From: Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org> 
> Date:05/17/2015 4:17 PM (GMT-06:00) 
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
> Cc: 
> Subject: Re: [PSUBS-MAILIST] LED lights 
> 
> For my application I am not sure how the LED element or the PCB would handle the oil.
> 
> 
>        From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
> Sent: Sunday, May 17, 2015 4:05 PM
> Subject: Re: [PSUBS-MAILIST] LED lights
>    
> Would it be practical to flood the led compartment with mineral oil to dissipate heat? Brian
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: Hugh Fulton via Personal_Submersibles <personal_submersibles at psubs.org>
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150517/cb2bd2c4/attachment.html>