[PSUBS-MAILIST] minkota test

[T Novak via Personal_Submersibles]

Thanks, Hank.
Okay, sounds like an informative test.  There may be corrosion in the
junction box.  I will know more when I open the access panel.
Tim

-----Original Message-----
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of hank pronk via Personal_Submersibles
Sent: May-26-15 5:34 PM
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] minkota test

Tim,
A quick way to test your motor, remove the prop, spin motor with drill, put
volt meter on + and - and if the motor works it will produce a current.  If
you have two motors on the same power source, spin one prop by hand and the
prop on the other motor will turn in steps. 
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles