[PSUBS-MAILIST] hemi heads

[Alan James via Personal_Submersibles]

Sounds great Sean,Carsten has probably got some good plans for a diver lockout.Alan
      From: Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Saturday, November 7, 2015 1:02 PM
 Subject: Re: [PSUBS-MAILIST] hemi heads
   
Ambitious project, subject to change as funding dictates. 4 person lockout submersible (pilot, supervisor, 2 divers). Large for a PSub, but sized for road / intermodal transport. Not ramp launchable. Operating depth of 600m, safety factor TBD. 48 hour mission, 72 hour reserve. Built to full ABS / GL compliance with documented tests (NDT, strain gauging, material and proof testing) to enable classification by engaging a surveyor in the future, but not classed at this time. When construction is completed, it will live in Vancouver - my second (first?) home.

Sean





On November 6, 2015 3:06:12 PM MST, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Hi Sean,We have it all sorted out, and they are going forward, my
>minimum thickness should be .875 not bad!  
>As for your project, are you releasing clues?     Hmmm  that means two
>subs only 5 hr apart, nice!  Hank 


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151107/d7b47682/attachment.html>