[PSUBS-MAILIST] manifold

[Stephen Fordyce via Personal_Submersibles]

Thanks Alan,
There is probably quite a bit of stuff I can help people with if they are
down under.

I did try with McMaster Carr but as you say, they are only prepared to
support big existing overseas customers.  The distributor idea is an
interesting one and I'd certainly jump on board if someone did it!
Probably a bit outside my scope of operation though, at least for the
foreseeable future.

Cheers,
Steve



On 11/11/2015 1:54 PM, "Alan James via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> Steve,
> some neat stuff there, will bookmark the catalogue.
> McMaster Carr don't sell online to N.Z. either.
> There could be a good business for someone who wanted to set up a
> distribution centre
> ordering on behalf of people. I think they sell to existing large
> companies.
> Alan
>
> ------------------------------
> *From:* Stephen Fordyce via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Wednesday, November 11, 2015 1:59 PM
> *Subject:* Re: [PSUBS-MAILIST] manifold
>
> Hi Brian and all,
>
> Western Enterprises (USA) does a nice and really cheap (~US$70?) 7-port
> (1/4" NPT) brass block rated to 3000PSI and idea for oxygen - see photo
> below - would be good if it's inside your sub.  They also do a SS version
> for several times the price.
>
> Global SCUBA Manufacturing makes most of the ones that Alec pointed out at
> Deep Six and they're pretty good too.  Being chrome plated brass they tend
> to be cheaper than SS, a bit nicer for oxygen service, and are still good
> for saltwater use.
>
> Both of those places only sell through distributors but you should be able
> to download catalogues (I can send if needed) so you can at least see
> what exists.
>
> I may have already mentioned (shameless plug), but I run a small
> business on the side which largely deals with custom assemblies and high
> pressure oxygen fittings, hoses, cylinder adaptors, etc. for SCUBA gas
> mixing and the like (and I'm a distributor for GSM and Western).  My
> catalogue is here:
> www.tfmengineering.com.au/TFM Engineering Catalogue 2015-10.pdf
> <http://www.tfmengineering.com.au/TFM%20Engineering%20Catalogue%202015-10.pdf>
>
> Much of my stock comes from the USA (to Australia) so it may not be very
> effective to ship it here and then back again, but if anyone is interested
> and has a few hundred USD worth of order I can probably arrange to get
> stuff sent direct from the factory instead.
>
> Cheers,
> Steve
>
> PS: What I wouldn't for access to McMaster Carr!  They don't ship to
> Australia :(
>
> [image: Inline image 1]
>
>
> On Wed, Nov 11, 2015 at 9:42 AM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
>
> Great !   Thanks everybody !
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Alec Smyth via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] manifold
> Date: Tue, 10 Nov 2015 16:34:20 -0500
>
> Hi Brian,
>
> Call George at Deep Six Scuba. Here is the relevant page below, just
> scroll down and you'll see manifolds. BTW he's a super helpful guy, he's
> always fishing around and coming up with weird adapters and stuff for my
> unusual requests. Say hi!
>
> http://www.deep-six.com/page30.htm
>
>
> Best,
>
> Alec
>
> On Tue, Nov 10, 2015 at 1:31 PM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Hi All,
>                Does anyone know where I can get a stainless high pressure
> manifold that would be an off the shelf type item?  I will be needing to
> distribute HP air to various places ( not breathing air) , also will need
> ports for gages, probably at least 6 ports. I can always plug any port not
> it use.
>
> Brian
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151111/2191989e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 48994 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151111/2191989e/attachment-0001.png>